当前位置：网站首页>华为设备配置Smart Link负载分担

华为设备配置Smart Link负载分担

2022-08-06 02:00:00 【Tony_long7483】

在这里插入图片描述

  1. 配置VLAN信息
    [LSW1]vlan batch 10 20 30
    [LSW1-GigabitEthernet0/0/2]port link-type trunk
    [LSW1-GigabitEthernet0/0/2]port trunk allow-pass vlan 10 20 30
    [LSW1-GigabitEthernet0/0/3]port link-type trunk
    [LSW1-GigabitEthernet0/0/3]port trunk allow-pass vlan 10 20 30
    [LSW2]vlan batch 10 20 30
    [LSW2-GigabitEthernet0/0/1]port link-type trunk
    [LSW2-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 20 30
    [LSW2-GigabitEthernet0/0/4]port link-type trunk
    [LSW2-GigabitEthernet0/0/4]port trunk allow-pass vlan 10 20 30
    [LSW3]vlan batch 10 20 30
    [LSW3-GigabitEthernet0/0/1]port link-type trunk
    [LSW3-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 20 30
    [LSW3-GigabitEthernet0/0/4]port link-type trunk
    [LSW3-GigabitEthernet0/0/4]port trunk allow-pass vlan 10 20 30
    [LSW4]vlan batch 10 20 30
    [LSW4-GigabitEthernet0/0/2]port link-type trunk
    [LSW4-GigabitEthernet0/0/2]port trunk allow-pass vlan 10 20 30
    [LSW4-GigabitEthernet0/0/3]port link-type trunk
    [LSW4-GigabitEthernet0/0/3]port trunk allow-pass vlan 10 20 30
  2. 配置VLAN映射
    [LSW1]stp region-configuration
    [LSW1-mst-region]instance 10 vlan 30
    [LSW1-mst-region]active region-configuration
  3. 创建Smart Link备份组，并指定端口角色
    [LSW1-GigabitEthernet0/0/2]stp disable
    [LSW1-GigabitEthernet0/0/3]stp disable
    [LSW1]smart-link group 1
    [LSW1-smlk-group1]port GigabitEthernet 0/0/2 master
    [LSW1-smlk-group1]port GigabitEthernet 0/0/3 slave
  4. 配置负载分担功能
    [LSW1-smlk-group1]load-balance instance 10 slave
  5. 使能回切功能并设置回切时间
    [LSW1-smlk-group1]restore enable
    [LSW1-smlk-group1]timer wtr 30
  6. 使能发送Flush报文功能
    [LSW1-smlk-group1]flush send control-vlan 10 password simple 123
  7. 使能接收Flush报文功能
    [LSW2-GigabitEthernet0/0/1]smart-link flush receive control-vlan 10 password simple 123
    [LSW2-GigabitEthernet0/0/1]stp disable
    [LSW2-GigabitEthernet0/0/4]smart-link flush receive control-vlan 10 password simple 123
    [LSW2-GigabitEthernet0/0/4]stp disable
    [LSW3-GigabitEthernet0/0/1]smart-link flush receive control-vlan 10 password simple 123
    [LSW3-GigabitEthernet0/0/1]stp disable
    [LSW3-GigabitEthernet0/0/4]smart-link flush receive control-vlan 10 password simple 123
    [LSW3-GigabitEthernet0/0/4]stp disable
    [LSW4-GigabitEthernet0/0/2]smart-link flush receive control-vlan 10 password simple 123
    [LSW4-GigabitEthernet0/0/2]stp disable
    [LSW4-GigabitEthernet0/0/3]smart-link flush receive control-vlan 10 password simple 123
    [LSW4-GigabitEthernet0/0/3]stp disable
  8. 使能Smart Link组功能
    [LSW1]smart-link group 1
    [LSW1-smlk-group1]smart-link enable
  9. 验证配置
    在这里插入图片描述
原网站

版权声明
本文为[Tony_long7483]所创，转载请带上原文链接，感谢
https://blog.csdn.net/Tony_long7483/article/details/126179763

边栏推荐

猜你喜欢

随机推荐